Month: February 2015
Making a Pinhole Camera
1. Choose a cylindrical or rectangular can or box. Pick a container that is about the size of a normal camera and is clean.
2. Choose a cylindrical or rectangular can or box. Pick a container that is about the size of a normal camera and is clean.
3. Determine the size of your pinhole. The distance between the film and the pinhole will affect the outcome of your photos. The film will be on the opposite side of the container from the pinhole, so most likely on the lid if you are using a can.
4. Make the pinhole in the bottom end of the container. You can either poke a hole directly through the bottom of your container using a pin, or you can cut a larger hole about 1/2-inch by 1/2-inch out of the bottom of your container and poke a pin through a separate piece of paper or thin metal.